Open the glove box and remove 4 frontal phillips screws.
There are 2 more phillips screws hidden behind the air vents. To remove the vents place a flat screwdrivers on the side and pry it out of the socket.
Remove the light from the top of the box, just pry it out with a flat screwdriver and disconnect the wires.
Pull the glove box straight out, it should come out quite easily.
Installation is the reverse of removal.
by Bimmer Guy on August 21, 2010 - 5 Comments
A young man who bragged online about driving through a residential neighbourhood at more than 100 km/h over the speed limit was convicted of careless driving,...
by Bimmer Guy on January 13, 2011 - 4 Comments
One unfortunate motorist on Windy Hill Road in Marietta slid backward on the icy road, and tried to spin his tires to get out. That didn't work out so well fo...
by Bimmer Guy on January 24, 2011 - 2 Comments
Ontario’s vehicle emissions control program, Drive Clean, is getting a tuneup. Amendments to Ontario Regulation 361/98 (Motor Vehicles) under the Environment...
by Bimmer Guy on August 29, 2010 - 2 Comments
Toronto police are having a European fling. After 20 years of riding macho Harley Davidsons, five officers are test driving svelte BMW motorcycles this year. A...
by Bimmer Guy on May 18, 2011 - 1 Comments
The Unforgettable 90's I suspect my love affair with BMW began the day I was born, which happened to also mark the occasion my Dad took delivery of his 1990 ...
Bimmer Guy - "Ill do it for free."...
